| 13351 |
1 SULZER RUTI rapier loom type G6200 W190 N8 SP from 1994, working with 190 cm, with electronic Staubli dobby type 2662 up to 20 levers with 16 installed. ELO. ETU. Equipped with 24 heddle frames, 2 cloth rolls, 2 warp beams Ø 800mm, 4 SAVIO |
| 13350 |
1 SULZER RUTI rapier loom type G6300 B190 N8/4 SP20/20 year 2001, working width 1900mm, electronic dobby Staubli 2861 with 20 tie-rods DRC4e, electronic take-up and let-off, independent false selvedge and leno device, Quick beam change system, inverter, weft selector for 8 colors, 20 heddle frames SCHMEING with quick connection DRC, 2 warp beams EURONORM with flanges Ø 1000 mm, 4 pre winders IRO with creel, 6.000 heddles, 6.000 droppers, prepared for batching motion (cloth rollers can be supplied if necessary), there are a lot of spare parts, including ribbons, grippers, 1 full width temple, 1 vulcanized take-up, roller etc. |
| 13335 |
8 Sulzer model M-8300, 190-cm, multi-phase weaving machines, year 1999
30 CRONLAND Beam Company Warp Beams -1,600 mm diameter, aluminum
1 CRONLAND Beam Company Spare Flange - 1,600 mm diameter, aluminum,
2 CRONLAND Beam Company Warp Beams - 1,000 mm diameter, aluminum
12 CRONLAND Beam Company Spare Flanges - 1,000 mm diameter, aluminum
1 GENKINGER - Warp and Doff truck, model MX, year - 1996, SN - 95.0975
1 Hubtex - Warp & Doff truck, model MDWEF/3500, year - 1999
1 FERBER - Warp Beam Transport truck, model ET-SUP-LAN, year 2000, SN MU12169EO
1 ALLTECH Electronics Battery charger - for GENKINGER truck, 110 volt, four total batteries
1 Industrial Battery & Charger, Inc., Battery charger - for Hubtex truck = model 12V0965H9E, SN - 99G10234, 24v., 208/240/480, 965 AH, two batteries
1 Hobart, model 600C3-24, Battery charger - for FERBER truck, SN- 399CS55373, 575 v. @30A - 60cy-3ph., 600 AH., two batteries
1 Ira L. Griffin, Module Lift Unit, SN. 101A, year - 2000
3 Frames - Pattern draw frames
3 Frames - Rotor holder frames
21 Cloth Rollers - aluminum, on-loom type
all Spare Parts - Style Change Rotors, droppers, etc
all Supplies - New, non used supplies, labeled and boxed, 13 pages available itemized listing with prices, quantities, and part numbers.
all Manuals
1 Interlake, Beam Rack, 8 beam positions capacity
all Cardboard Tubes - approximately 575 cardboard, cloth take-up tubes, 5.03" O.D. x 73" L. x .375" wall thickness. |
| 13288 |
6 Sulzer rapier terry weaving machines G 6100, year 1994. 250 cm working width. Staubli 2600 STP Electronic Dobby with 16 Levelers
Each loom with: - 1,5 Ground beam 1.000 mm flange diameter, - 1,5 Pile beam 800 mm flange diameter, -16 GROB heddle frames, - 8000 Droppers and Wires, 4 weft feeders, - Off looms take up (Big rolls Batcher)
All available spare part department |
| 13287 |
2 Sulzer rapier terry weaving machines G 6100, year 1994, 1 x 220 cm + 1 x 260 cm working width. STAUBLI CX 960 Electronic JUMBO Jacquard machine with 10800 hooks
Each looms with: Jacquard Stands and Gantry included, - 1,5 Ground beam 1.000 mm flange diameter, - 1,5 Pile beam 800 mm flange diameter, - 3 weft feeders, - Off looms take up (Big rolls Batcher)
All available spare part department |
| 13286 |
6 Sulzer rapier terry weaving machines G 6100, year 1994, 260 cm working width
with STAUBLI CX 860 Electronic Jacquard machine with 2688 hooks
Each looms with: Jacquard Stands and Gantry included, - 1,5 Ground beam 1.000 mm flange diameter, - 1,5 Pile beam 800 mm flange diameter, - 3 weft feeders, - Off looms take up (Big rolls Batcher)
All available spare part department |
| 13285 |
8 Sulzer rapier terry weaving machines G 6100, year 1994, 260 cm working width. BONAS BLJ 2 Electronic Jacquard machine with 2688 hooks
Each looms with: Jacquard Stands and Gantry included, - 1,5 Ground beam 1.000 mm flange diameter, - 1,5 Pile beam 800 mm flange diameter, - 3 weft feeders, - Off looms take up (Big rolls Batcher)
All available spare part department |
| 13284 |
6 Sulzer rapier terry weaving machines G 6200, year 1995-1996, 260 cm working width. BONAS ASJ Electronic Jacquard machine with 2688 hooks
Each looms with: Jacquard Stands and Gantry included, - 1,5 Ground beam 1.000 mm flange diameter, - 1,5 Pile beam 800 mm flange diameter, - 3 weft feeders, - Off looms take up (Big rolls Batcher)
All available spare part department |
| 13252 |
15 SULZER projectile looms type PU 153" VSD 110 KR D1R from 1981/84, 4 colors STAUBLI dobby type KR 1430 & KR 2400 up to max. 18 shafts, reinforced for heavy fabrics, 380V, each equipped with : 4 weft accumulators IRO type IWF 9107 and cone stand, batching motion (off loom take up), 5 warp stop motion bars, 4 heddle frames, 4.000 heddles & 4.000 droppers, without central trucking device TLL, without warp beams, looms are equipped with differential to work with split beams up to Ø 1000mm, projectiles and guide teeth for +/- 320 cm. |
| 13093 |
3 Sulzer MEI Rapier Label Weaving Machines Model G6100.S.190.N12.J.G1 Year 1990. 1900mm weaving width, 12 color weft insertion, MEI Thermal Label Cutting system. Bonas Electronic Jacquard Model IBJ.II (Year 1998) With Series 250 controllers 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges Independent gantry shaft drive.
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 12 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted.
1 Sulzer MEI Rapier Label Weaving Machine Model G6100.S.190.N12.J.G1 Year 1990. 1900mm weaving width, 12 color weft insertion, MEI Thermal Label Cutting system. Staubli Mechanical Jacquard Model CR.620 1344 hook Capacity - 1152 Hooks installed Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges 1 Cloth roller 12 Weft accumulators 1 Weft creel stand 5 Warp stop bars and droppers as fitted.
2 Sulzer Vaupel Rapier Label Weaving Machines Model G6100.S.200.N8.J.Q.G1 Year 1992. 1900mm weaving width, 8 color weft insertion, Vaupel EWM.80 Thermal Label Cutting system. Staubli Electronic Jacquard Model CX.860 With Series JC4 controllers 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges
Independent gantry shaft drive. Microprocessor control
With 1 Warp beam 700mm diameter flanges 1 Cloth roller 8 Weft accumulators 1 Weft creel stand 5 Warp stop bars and droppers as fitted.
2 Sulzer MEI Rapier Label Weaving Machines Model G6100.S.160.N8.J.Q.G1 Year 1993 1900mm weaving width 8 color weft insertion MEI Thermal Label Cutting system. Staubli Electronic Jacquard Model CX.860 With Series JC4 controllers 1344 hook Capacity - 1152 Hooks installed Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive. Microprocessor control
With 1 Warp beam 700mm diameter flanges 1 Cloth roller 8 Weft accumulators 1 Weft creel stand. 5 Warp stop bars and droppers as fitted. |
| 13092 |
4 Sulzer-Vaupel Projectile Label Weaving Machines Model P.7100.S.220.N4.J.D1, Year 1988, 85 inches weaving width, 4 color weft insertion, Vaupel Model EWM.80 Thermal Label Cutting system. Staubli CR.520 Mechanical Jacquard, 1344 hook Capacity - 1152 Hooks installed, Harness 10 repeats + 64 threads for selvedges, Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
1 Sulzer Vaupel Projectile Label Weaving Machine Model P.7100.S.220.N4.J.D1 Year 1992. 85 inches weaving width, 4 color weft insertion, Vaupel Model EWM.80 Thermal Label Cutting system. Staubli CR.620 Mechanical Jacquard, 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
1 Sulzer Vaupel Projectile Label Weaving Machine Model P.7100.S.220.N4.J.D1 Year 1992. 85 inches weaving width, 4 color weft insertion, Vaupel Model EWM.80 Thermal Label Cutting system. Bonas Electronic Jacquard Model IBJ.II (Year 2000) With Series 250 controller, 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
6 Sulzer Vaupel Projectile Label Weaving Machines Model PU.85.VSI.150.J.D1.F Year 1986/87. 85 inches weaving width. 4 color weft insertion. Vaupel Model EWM.80 Thermal Label Cutting system. Staubli CR.520 Mechanical Jacquard, 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
3 Sulzer Vaupel Projectile Label Weaving Machines Model PU.85.VSI.150.J.D1.F, Year 1984/85. 85 inches weaving width. 4 color weft insertion. Vaupel Model EWM.80 Thermal Label Cutting system. Schleicher Model 305 Mechanical Jacquard, 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
1 Sulzer Vaupel Projectile Label Weaving Machine Model PU.85.VSI.150.J.D1.F Year 1984. 85 inches weaving width. 4 color weft insertion. Vaupel Model EWM.80 Thermal Label Cutting system. Bonas Electronic Jacquard Model IBJ.II (Year 1999) With Series 2540 controller 1344 hook Capacity - 1152 Hooks installed. Harness 10 repeats + 64 threads for selvedges. Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted. Projectiles & Guide teeth as fitted
2 Sulzer Vaupel Projectile Label Weaving Machines Model PU.85.VSI.150.J.D1.F Year 1984. 85 inches weaving width. 4 color weft insertion. Vaupel Model EWM.80 Thermal Label Cutting system. (Disassembled - As Is) Schleicher Model 305 Mechanical Jacquard 1344 hook Capacity - 1152 Hooks installed, Harness 10 repeats + 64 threads for selvedges, Independent gantry shaft drive
With 1 Warp beam 700mm diameter flanges, 1 Cloth roller, 4 Weft accumulators, 1 Weft creel stand, 5 Warp stop bars and droppers as fitted., Projectiles & Guide teeth as fitted |
| 13085 |
1 SULZER RUTI terry rapier loom type G6100 B260 F6 JPG1 from 1989, working width 2600mm, 6 colors, jacquard GROSSE type UNIRAPID2 for 1344 hooks (1184 hooks installed) + UNIRAPID2 for 1344 hooks (1248 hooks installed),
Machine equipped with : 2 upper beams, 2 ground beams, 1 batching motion, droppers, 2 weft accumulators IRO NOVA with electrical box - 4 colors, creel for cones, without gantry, without harness. |
| 13084 |
1 SULZER RUTI terry rapier loom type G6100 B210 F6 JEPG1 from 1990, working width 2100mm, 6 colors, STAUBLI rotary dobby with 4 levers installed for ground + GROSSE jacquard UNIRAPID2 for 2 x 1344 hooks (2 x 1104 hooks installed) year 1990,
Machine equipped with : 2 upper beams, 2 ground beams, 1 batching motion, droppers, 4 heddle frames, 2 weft accumulators SIRIO Micro S-Z (1995) with electrical box - 4 colors, creel for cones, without gantry, without harness. |
| 13083 |
1 SULZER RUTI terry rapier loom type G6100 B210 F6 JEPG1 from 1990, working width 2100mm, 6 colors, STAUBLI rotary dobby with 4 levers installed for ground + GROSSE jacquard UNIRAPID3 for 896 hooks (696 hooks installed) year 1990,
Machine equipped with : 2 upper beams, 2 ground beams, 1 batching motion, droppers, 4 heddle frames, 2 weft accumulators SIRIO Micro S-Z (1995) with electrical box - 4 colors, creel for cones, without gantry, without harness. |
| 13082 |
4 SULZER RUTI terry rapier looms type G6100 B210 F6 SPG1 from 1990, working width 2100mm, 6 colors, mechanical STAUBLI dobby type 2031 with 4 levers installed for ground + GROSSE jacquard UNIRAPID3 for 2 x 1344 hooks (2x1104 hooks installed) year 1993,
Each machine equipped with : 2 upper beams, 2 ground beams, 1 batching motion, droppers, 4 heddle frames, 2 weft accumulators SIRIO Micro S-Z (1995) with electrical box - 4 colors, creel for cones, without gantry, without harness. |
| 12921 |
1 SULZER projectile loom type PU 130" VSI 120 J D1F from 1987, 4 colors, jacquard GROSSE type Unirapid II for 2688 hooks, 4 weft accumulator SULZER FTD4.1, 3 warp beams Ø 800mm, batching motion MENGEN, gantry STEENO 1997, harness 1997, 4 warp stop motion bars, 5.000 droppers.
1 Telar Sulzer PU 130" VSI 120 J D1F de 1987, 4 colores, Jacquard Grosse Unirapid II para 2.688 ganchos, 4 acumuladores Sulzer FTD4.1, enrrollador de tejido MENGEN para rollos gigantes , estructura STEENO para soporte y mantenimiento del jacquard de 1997, arnés de 1997, 4 barras de paros de urdimbre, 5.000 laminillas |
|
