| 13003 |
PRINTING DEPARTMENT:
1 No. 1 Print Range, consisting of:
A Roll Storage Table 6' x 9-1/2' with Pneumatic Pump
B Intra Roll Cradle 132" Wide, Model CHD-48, 5 HP, 240 Volt DC Motor and Intra Railway Sewing Machine, Model STS 1993, Merrow Head
C Intra Driven Z-Scray, Pipe Type, 5 HP, Vertical Gear Motor, Three-Roll Compensator, Set of Guider Specialty 18" Air Guiders on Motorized Bridge
D Lamson Dry Vacuum 25 HP Four-Stage Blower Model 514-4-0-AD with Stainless Steel Trap 120" Slot
E MBK 14 Color Capability Rotary Screen Printer, Model 2020, Type SDM-D73, 1990, 129" Rubber Belt Set of ARO Color Pumps, Blanket Washer No. 1
F Aztec Dryer with 9-1/2" Entrance Belt Extension, Four Zones, with Eight (8) Circulation Fans, 120" Fiberglas Belt
G Intra Exit J-Scray Model RT800 with Vertical Gear Motor Drive, In-Line Inspection with Overhead Light, Operator Platform and Controls, 128" Face Width
H Intra Three-Roll Compensator Model Comp SF
I Set Guider Specialty 18" Air Guiders, on Motorized Bridge
J Intra Three-Roll Automatic Batcher, 125" Face Width with Hold Down, Transfer and Serrated Knife Cut-Off
K Roll Out Table 8' Wide x 7-1/2' Long with Pneumatic Dump, Extension 8' x 6' Long
L Range Drive
1 Merrow Sewing Machine Model 70-D3B-2 with Table and Motor
1 Re-Roll and Slitting Station, consisting of:
A Roll Storage Table, 64" x 148" Long
B Z-Scray, Wooden Slat Type, with Two-Roll Driven Let-Off, with 14" Diameter Bed Rolls, 121" Long, Dinsmore Railway with Merrow Head, 122" Width
C Sky Stand with Two (2) Sets Guider Specialty Air Guiders on Bridge
D Two-Roll 120" Surface Winder with Hold-Down and Transfer (manual), 20 HP 230/460 Volt Motor
E Roll-Out Table, 106" x 75" Long
1 120" to 60" Double and Roll Machine with Set-Off Button with Air Guiders Stainless Apex 15 HP Drive Motor 230/460 Volts Controls
2 Printer Range No. 2, consisting of:
A Roll Storage Table, 60" x 9-1/2' Long with Pneumatic Dump
B Intra Drive Cradle Let-Off Model UCSU 1998, 133" Face, Hydraulic Drive, with Railway Sewing, Merrow Head
C Intra Z-Scray Model ZB23, 1998, Stainless Steel Pipe Type, Sky Stand with Set E&L KF2060, on Motorized Bridge
D Kalin Lint Vacuum System with Dual Removal Blowers
E No. 4 Stork Lint Removal (Glue Type)
F Peter Zimmer Printer 1976, 122" Rubber Blanket, 16 Colors with 13 Color Position in Use, Blanket Washer, 50 HP Main Drive Motor, 575 Volts
G Aztec Dryer with Extended Entrance Belt, 16' Long, Four-Zone Gas Fired Single Pass Dryer with Eight (8) Circulation Fans, 130" Wide with 120" Fiberglas Belt, 10 HP, 575 Volt Drive Motor
H Intra J-Scray and In-Line Inspection Machine, Model JB10I, Stainless Steel Pipe, with Block Viewing Board, Overhead Light, Operator Controls and Operator platform, 128" Wide
I Sky Stand Model C2, with Set Guider Specialty 18" Guiders on Motorized Bridge
J Intra Three-Roll Automatic Batcher Model 3RW4SB, 128" Face, with Hold Down,
Transfer, Serrated Knife Cut-Off
K Roll Out Table 7' x 6' Long
L Range Drive
1 Merrow Sewing Machine Model 70D3B with Table and Motor
1 Drum Washer Three-Brush (Shop Built)
1 Van Wyk Drum Washer Three-Brush
1 Homogenizer 10 HP on Hoist
1 Homogenizer 15 HP on Hoist
1 Print Range No. 4, consisting of:
A Roll Out Table 5' x 9-1/2' Long with Pneumatic Dump
B Intra Driven Roll Cradle 133" Model US SU
C Intra Z-Scray, Stainless Steel Pipe Type, Model ZB23, Driven Pull Roll, Sky Stand with Set EUL KF2060 Guiders on Motorized Bridge
D Kalin Lint Removal System Model V1/4, 1998, with Dual Removal Blowers
E Peter Zimmer 16 Color Printer with 14 Positions in Use, Model RSO-390, 122" Rubber Blanket, Blanket Washer, 14 ARO Color Pumps, 50 HP 575 Volt Drive Motor
F Aztec Dryer with 16' Extended Belt Entry, Four-Zone Gas Fired with Eight (8) Circulating Fans, 130" Face with 120" Fiberglas's Belt, 10 HP, 575 Volt Belt Drive
G Intra J-Scray with Inline Inspection Machine Model JB10I, 1998, Black Viewing Board with Overhead Light, Operator Platform, Operator Controls
H Intra Compensator, Three-Roll Model C-2, 1998, with Sky Stand and Guider Specialty 18" Air Guiders on Motorized Bridge
I Intra Three-roll Automatic Batcher Model 3RW4S8, 1998, 128" Wide, with Hold Down, Transfer, Serrated Knife Cut-Off
J Roll Out Table 7' x 6' Long
1 Merrow Sewing Machine Model 70-D3B with Table and Motor
1 Merrow Sewing Machine Model 70-D3B-2 with Table and Motor
1 Printing Range No. 5, consisting
A Roll Storage Table 5' x 9-1/2' Long
B Intra Driven Cradle 132" Face, Model US SU, 1997, with Railway Sewing machine, Merrow Head
C Intra Z-Scray, Stainless Steel Pipe Type, Model ZB-23, 1997, with Intra Compensator Model IS, with Set E&L KF-2060 Guiders on Motorized Bridge
D Stork Lint Remover (Glue Type),
E Industrial Systems Rotary Screen Printer 6 Color with 12 Positions in Use,
Model M-3000, 124" Rubber Blanket, 12 ARO Color Pumps, Blanket Washer
F Aztec Dryer with 13' Extended Belt Entry, Four-Zone Gas Fired Dryer, with Eight (8) Circulating Fans, 130" Roll Face with 118" Fiberglas's Belt, 10 HP 575 Volt Belt Drive.
G 1997 Intra J-Scray with In-Line Inspection Machine, Model JB, with Black Viewing Board with Overhead Light, 128" Face, Operator Platform and Controls
H Intra Three-Roll Compensator Model C/SF-2, 1997, with Set Guider Specialty 18" Guiders on Motorized Bridge
I Intra Three-Roll Automatic Batcher, 128" Wide, Model 3RW-4S8, 1997, with Hold Down, Transfer, Serrated Knife Cut-Off
J Roll Out Table 8' x 6' Long
1 Print Range No. 6, consisting of:
A Roll Storage Table 5' x 9-1/2' Long
B Intra Driven Cradle 132" Face, Model US SU, 1998, with Railway Sewing Machine, Merrow Head
C Intra Z-Scray, Stainless Steel Pipe Type, Model ZB-23, 1998, with Sky Stand-In and E&L KF-2060 Guiders on Motorized Bridge
D Stork Lint Remover (Glue Type)
E Industrial Systems Rotary Screen Printer, 16 Color with 13 Positions in Use, Model M-3000, 121" Rubber Blanket (Trimmed to 118"), 13 ARO Color Pumps, Blanket Washer
F Aztec Dryer with 13' Extended Belt Entry, Four-Zone Gas Fired Dryer, with Eight (8) Circulating Fans, 130" Wide with 118" Fiberglas's Belt, 10 HP 575 Volt Belt Drive
G Intra J-Scray with In-Line Inspection Machine, Model JB 10I, 1998 with Black viewing Board with Overhead Light 128" Face, Operator Platform and Controls
H Intra Compensator Model C2 Sky Stand and Set Guider Specialty 18" Guiders on Motorized Bridge
I Intra Three-Roll Automatic Batcher 128" Wide, Model 3RW-4S8, 1998, with Hold Down, Transfer, Serrated Knife Cut-Off
J Roll Out Table 8' x 6' Long
1 Merrow Sewing Machine Model 70-D3B with Table and Motor
1 Printing Range No. 7, consisting of:
A Roll Storage Table 5' x 9-1/2' Long
B Intra Driven Cradle 133" Face, Model US SU, 1998, with Railway Sewing Machine, Merrow Head
C Intra Z-Scray, Stainless Steel Pipe Type, Model ZB-23, 1998, with Intra Compensator, Model IS, Sky Stand with E&L KF-2060 Guiders on Motorized Bridge
D 1998 Kalin Lint Removal System
E Industrial System Rotary Screen Printer, Model M-300, 16 Color with 13 Positions in Use, 125" Rubber Blanket, 14 ARO Color Pumps, Blanket Washer
F Aztec Dryer with 13' Extended Belt Entry, Four-Zone Gas Fired Dryer,
with Eight (8) Circulating Fans, 130" Wide with 118" Fiberglas's Belt, 10 HP 575 Volt Belt Drive.
G Intra J-Scray with In-Line Inspection Board Model JB 10I, 1998, with Black viewing Board with Overhead Light, 128" Face, Operator Platform and Controls
H Intra Three-Roll Compensator Model C2, Sky Stand and Set Guider Specialty
18" Guiders on Motorized Bridge
I Intra Three-Roll Automatic Batcher, 128" Wide, Model 3RW-4S8, 1998, with Hold Down, Transfer, Serrated Knife Cut-Off
J Roll Out Table 8' x 6' Long
SANFORIZING, CALENDERING AND RE-INSPECTION:
1 Sanforizing Range, consisting of:
A Roll Storage Table 92" Wide x 16' Long
B Idler Cradle Let-Off with Brake, 120" Wide
C Stainless Steel J-Scray with Driven Pull Roll, 130" Wide, 7-1/2 HP, 575 Volt Motor, Sky Stand with Set Guider Specialty 18" Air Guiders on Bridge
D Morrison Cole Spray House, 1997, Stainless Steel Construction
E Morrison Compressive Shrinking Machine 1997, 125" Face with 114" Rubber Belt,
25 HP Motor, 20 HP Rubber Belt Grinder
F Morrison Palmer Unit, 1997, 120" x 84" Cylinder on 118" Felt Blanket,
7.5 HP Drive Motor with Gear Box
G Set of Three (3) Cooling Cans, 120"
H Intra Idler Roll Set with 120" Bow Roll Model SS
I Birch Brothers Three-Roll Automatic Batcher 126" Face Width, Hold Down, Transfer, Serrated Knife Cut-Off
J Roll Out Table 8' x 6' Long, with 90" x 16' Extension
1 Calendering Range, consisting of:
A Roll Storage Table 8' Wide x 89" Long
B Intra Driven Cradle 144" Wide, Model UNR-CL, 2001,
C Intra Railway Sewing Stand with Merrow Head
D Intra Z-Scray 144" Wide with Driven Pull Roll, Set Guider Specialty 18" Air Guiders with Bridge, Erhardt & Leimer Expander Roll, TypeSW-7573, 138" Wide, Operator Platform and Controls, Intra Draw-Roll Set Model PD, 1998
E Butterworth Three-Roll Calender, 134" Top and Bottom Steel Rolls, with Top Roll Gas Heated, Bottom Roll Bored for Gas Heat, Middle Roll 132" Filled Wool Composition, 60 HP, 230/460 Volts, Vertical Gear Motor Drive, Two (2) 10" Dia. Chill Rolls, 134" Wide, Hydraulic System, Approximately 120 Tons
F Operator Platform with Vertical Thru-Light Inspection Sky Stand and Set Guider Specialty 18" Air Guiders on Bridge
G Intra Slitting Attachment, Model SCA, 2001, with Seven (7) Pneumatic Slitting Positions, Two (2) Score Cutters
H Intra Three-Roll Automatic Batcher, Model 3RW, 1998, 140" Wide with Hold Down, Transfer, Serrated Knife Cut-Off
I Roll Out Table, 9' x 7'Long with 6' x 14' Extension
J One (1) Spare Filled Roll with New Filling (In Box)
1 Re-Inspection Range, consisting of:
A Roll Storage Table, 8' x 9-1/2' Long with Pneumatic Dump
B Intra Driven Cradle, Model CHD-5, 1994, with Railway Sewing Machine and Merrow Head, 134" Wide
C Intra Inspection 134" Wide with Black Viewing Board, Overhead Light, True-Meter Yardage Counter, Operator Platform and Controls
D Intra Two-Roll Surface Take-Up with Edge Guiding, 126" Wide x 10" Diameter Bed Rolls
E Conveyor 10' Long with Tilt / Dump (To roll table or out)
F Roll out Table 8' Wide x 20' Long
G Hydraulic Drive System, 10 HP, 575 Volts, with Reservoir
1 Cobra IV Pallet Wrapping Machine, by ITW Mima with Platform and Revolving Wrapper, Model Cobra IV
COLOR MIXING:
1 Klieverik Dispensing / Mixing System with Two IPS1200 Dispensers, Color and Additives, Handles 23 Items, 19 Pumps in Use. Installed 1999.
A TDR - Total Paste Return Control Console
B 42 Barrel Color Storage and Retrieval System with Barrel Washer and Scraper.
SCREEN CLEAN-UP:
1 Intra Squeegees and Color Pipe Washer Six Positions per Wash
1 Stork Two-Position 130" Screen Washer
1 Technijet "Vaporclean Rotary Screen Washer" for 130" Screens for 36" Repeat
1 Technijet "Vaporclean Rotary Screen Washer" for 130" Screens for 25" Repeats
1 Intra Squeegee and Color Pipe Washer Not in Service (Electrical Parts Missing)
2 Vaporclean Rotary Screen Washer by Technijet Ltd., England 480 Volts New, Never Installed for up to 130" Screens
PRINT LAB:
1 Johannes Zimmer Mini MDF R290 Color Strike Table 30x52 Year 1985
1 Blue M Oven 19" x 18" x 20" Deep
1 L-C Oven Model 3511 120 Volts
2 MacBeth Spectralight II SPL75B, Five-Light System
1 Swatch Oven Electric Heat, with Exhaust, Swatch Rack for 5 Samples, 476" x 58" High x 50" Deep
1 Hot Water Heater and Storage Stainless Steel Tank by Reco Tanks 1966, 84" Diameter x 216" Tall
ENGRAVING DEPARTMENT:
1 1998 Stork SDK Type LEN 4003 480 Volts (for up to 130" Screens)
1 1998 Stork SDK Type LEN4003 480 Volts (for up to 130" Screens)
1 1990 Stork STK-2010 Type LE2 Laser Engraver No. 083 (for up to 130"Screens)
1 1998 Ingersoll Rand Air Dryer Model TXR300
1 Stork Lacquer Coating Machine Type RSE3130 480 Volts
1 Zimmer Lacquer Coating Machine
1 Stork Lacquer Coating Machine SCR75
1 C&C Technologies / Dryer Model CC375-1 for Two Screens
1 C&C Technologies / Dryer Model CC375-1 for One Screen
1 Van Wyk VIP Rounding Oven
1 Air And Energy System Curing Oven Gas Fired with Eclipse Burners Circulating Fan, Honeywell Temperature Controls
1 Curing Oven Electrically Heated with Chromalox Heater, Honeywell Controls, Circulating Fan
1 Screen Inspection Light Stand, 148"
1 Screen Inspection Light Stand, 130"
1 1998 Stork End Ring Machine Type RLO3631 168" Bed Length
1 1998 Stork End Ring Machine Type RLO3631, 168" Bed Length
1 1990 Stork Color Scanner CDS 90 with Computer, "Black and White" Use Only - Due to Software
1 Ingersoll Rand T30 Air Compressor with 100 Gallon Receiver Tank, (In Case)
SCREEN STORAGE AND REPAIR AREA:
Lot Approximately 3,236 Screens 110" Print Width, 116" Screen
1 Stork End Ring Machine 150" Bed Length (Screen Tending Area)
1 Rothtec End Ring Machines 190" Bed Length (Screen Tending Area)
AIR COMPRESSOR ROOM:
2 IR SSR-EP100 Air Compressors
1 IR Hydrogard Dryer HP550W
1 Richmond Receiving Tank
1 IR Dryer Model DXR600W
1 Receiver Tank
1 Grimmer Schmidt 25 HP Compressor
|
|
