| 13349 | 1 SCHLAFHORST Direct warping machine type MZD from 1977, working width 2200mm, Ø warp beams 800mm, with straight creel SCHLAFHORST type Z23 of 576 positions, 28 warp beams. | | 13349 | 1 KARL MAYER Direct warping machine type DS84/40P year of construction 1984, working width 1850mm, Ø beams 1000mm, with antistatic GSP 75 for filament, with filament creel 672 positions. | | 13347 | 1 SUCKER MULLER Sizing machine from 1986/94, creel for 14 warp beams 2200mm type BNP from 1986, pre-size bath AB 300 from 1994, size bath SD40 from 1994, 9 drying cylinders TZ4 from 1986 of those 5 Teflon coated, head stock WN working width 3600mm from 1994 and max. beams Ø 1000mm, size kitchen and reserve tank. | | 13337 | 1 Hacoba sectional warping machine type USK 1000 year 1992, 220 cm working width
1 620 ends creel with Hacoba electronic tension control | | 13232 | 1 BENNINGER type ZE Direct warping machine from 1987, working width 1800mm, Ø beams 1000mm, warping speed 1200m/min, V-creel BENNINGER type GCF for 560 spindles, gauge 320mm, left and right 56 rows of 5 cones, max. 8 warp beams, 380V. | | 13231 | 1 HACOBA type USK T "Tronic" 1250 sectional warping machine from 04/1993, working width 3200mm, maximum Ø beams 1250mm, creel for 672 positions (= 28 doors of 24 cones), pneumatic tension control with rotary tension units, beaming machine with pressure roll installation. | | 13229 | 1 SUCKER Sizing machine for filament type WZ year of construction 1982, creel for 2 warp beams Ø 1000mm, working width 1850mm, size box, 2 pre-dryers LT4, 5 drying cylinders (Teflon), cooling cylinder, head stock 1850mm Ø 1000mm. | | 13153 | 1 West Point Slasher (Mill No. 1) 138" Delivery year 1997.
18 Can (2x3H + 4x3H) Horizontal Drying Section
80-1/2" Face x 30" Diameter
Two (2) West Point Single Dip Size Boxes
One (1) West Point Tensioner
(2) 6-Position Creels
(will run 40" x 72-1/2" Section Beams)"
USD 240,000.00 | | 13094 | 1 Karl Mayer Electronic Sectional Warping Machine Model Erg-O-Matic Year 1998. Maximum Warping width 2200mm, Maximum beam Diameter 800mm, Computer Controlled. Section alignment, Section Width, Section Speed, Tension section control
Electronic Leasing, Section Tension Control Stand, 1 Karl Mayer Swivel Side Creel
528 Running ends Double sided. Swivel side frames (4 x 6) x 11 each side, 12 inch package centers, Inside loading, Outside discharge. Karl Mayer hydraulic triple post tension unit. With broken end detector incorporated. Year: 1998 | | 13036 | 1 VTA Sectional warping machine type electronic H 420 RS from 1994, working width 2500mm, warp beam tubes up to Ø 1000mm.
1 creel for 602 cones + 1 creel for 432 cones + 1 separate creel of 32 cones 380 volt - 3Ph - 50Hz | | 13035 | 1 BENNINGER Sectional warping machine type SUPERTRONIC from 1990, working width 2550mm,
2 bobbin creels for 624 bobbins - total capacity 1248 bobbins, 2 cross elements : warping cylinder length 2700mm, re-winder, wax installation. | | 13024 | 1 Sectional warping machine HACOBA type US-S/25 from 1986, working width 2000mm, Ø flanges 800mm, creel HACOBA 560 cones, gauge 270mm.
1 Urdidor seccional Hacoba tipo US-S/25 de 1986, ancho de trabajo de 2.000 mm, con fileta Hacoba para 560 conos, encartamiento de 270 mm | | 13023 | 1 Sectional warping machine HACOBA type US-S/25 from 1987, working width 2000mm, Ø flanges 800mm, creel HACOBA 560 cones, gauge 270mm.
1 Urdidor seccional Hacoba US-S/25 de 1987, ancho de trabajo de 2.000 mm, balona de 800 mm, fileta Hacoba para 560 conos con encartamiento de 270 mm. | | 13012 | WARPING
4 West Point Warpers with Dust Plenum 40" x 54-1/2" Warper Beam, 1989.
4 Benninger "V" Type Warper Creels 468 Ends. Two (2) Traveling Fans, (1) w/West Point Electro sense Stop Motion, (3) w/Mechanical Stop Motion
SLASHING/REBEAMING
1 West Point Slasher, 1989 (Mill No. 1) 122" Delivery, 18 Can (2x3H+4x3H) Horizontal Drying Section, 62-1/2" Face x 30" Diameter, (2) West Point Single Dip Size Boxes, 60" Width, (2) 12-Position Creel (will run 40" x 54-1/2" Section Beams)
1 West Point Slasher, 1989. (Mill No. 2) 122" Delivery, 18 Can (2x3H+4x3H), Horizontal Drying Section 62-1/2" Face x 30" Diameter. (2) West Point Single Dip Size Boxes, 60" Width. (2) 12-Position Creels (will run 40" x 54-1/2" Section Beams)
1 West Point Slasher, 1989. (Mill No. 3). 122" Delivery, 18 Can (2x3H+4x3H) Horizontal Drying Section, 62-1/2" Face x 30" Diameter. (2) West Point Single Dip Size Boxes, 60" Width. (2) 12-Position Creels (will run 40" x 54-1/2" Section Beams)
1 West Point Slasher, 1989. (Mill No. 4). 122" Delivery, 18 Can (2x3H+4x3H) Horizontal Drying Section, 62-1/2" Face x 30" Diameter, (2) West Point Single Dip Size Boxes, 60" Width. (2) 18-Position Creels (will run 40" x 54-1/2" Section Beams) | | 12839 | 1 ZELL Sizing machine type FN / EB year of construction 1976, max. working width 2200mm between the disks, max. beam width 2500mm, max. Ø beams 1000mm distance dryer - beaming machine is 4.5m, motor 10kW automatic controllable from 5 - 80 m/min, PIV drive type UG3, MAHLO system with automatic speed control, waxing device at the end of the drying cylinders.
Creel type ZWG with support for 3x6 warp beams, mechanical tension control, width 1600 x diameter 800mm.
Sizing bath type XK, working width 1600mm, squeeze rollers width 1720mm.
Drying system : 4 Teflon coated cylinders SINCRO4 with diameter 800mm, working width 1600mm and cylinder width 1800mm. 3 multi-cylinder model ZT5 with diameter 800mm in a frame for 5 cylinders of those 1 cylinder Teflon coated, working width 1600mm, cylinder width 1800mm.
Sizing kitchen : model ZELLOMATS ZS500 max. content 700 liters, useful content 500 liters, met automatic mixer and full automatic sizing process.
1 Engomadora Zell tipo FN/EB de 1976, ancho máximo de trabajo entre platos de 220 cm, ancho máximo del plegador 250 cm, diámetro máximo del plato de 1.000 mm, distancia entre el secador y el envolvedor de plegadores de 4.5 metros, motor de 10 Kw, de velocidad controlada automáticamente por comando PIV tipo UG3 entre 5 y 80 metros por minuto, sistema Mahlo con control automático de velocidad, sistema aplicador ce cera a continuación de los cilindros secadores.
Fileta para plegadores con soportes para 3 x 6 plegadores de 160 cm x 800 mm de balona, control mecánico de tensión,
Caja de engomado XK, de 160 cm de ancho de trabajo, Ancho de los rodillos de exprimido de 1720 mm.
Secador compuesto por 4 cilindros teflonados SINCRO4 con 800 mm de diámetro x 1.600 mm de nacho de trabajo, con ancho total de 1.800 mm. + 3 multi-cilindros modelo ZT5 con diámetro de 800 mm, en estructura para 5 cilindros, de los cuales 1 es teflonado, con ancho de trabajo de 1.600 mm, ancho total de los cilindros de 1.800 mm.
Cocina de engomado modelo ZELLOMTS ZS500 para un contenido máximo de 700 litros, contenido de trabajo de 500 litros, completa con su mezclador automático y proceso completamente automático |
|
